Automatic Sliding Gate Motor NICE-1000KG

Description

Nice ROBUS 1000 – irreversible 24 Vdc motor with electromechanical limit switch and built-in control unit (BlueBUS technology) for sliding gates weighing up to 1000 kg.

• User-friendly: the Nice BlueBUS technology, enables to power and control a maximum of seven couples of photocells from the MoonBus series using two wires only.
• Practical: the control unit and PS124 buffer battery (optional) can be connected by means of a simple connector and can be housed directly inside the motor.
• Advanced: RB1000 is equipped with a temperature sensor: adapt the motor power to the climatic conditions and at the same time thermal cut-out; a master/slave selection automatically synchronizes two motors. This means it is possible to automate 2-leaf sliding gates set opposite each other.
• Intelligent: thanks to the obstacle detection system and automatic programming of the working times. Self-diagnosis by means of a flashing light. 8 programming levels.
• Safe: acceleration and deceleration can be adjusted at the beginning and end of each opening and closing maneuver.
• Sturdy: base and release in pressure die cast with easy to open handle.
• Very quiet: gear motor on bearings.

Technical features:

Electrical data

• • Power supply (control board): 230 V
  • Power supply (motor): 24 V
  • Absorption: 2.3 A
  • Power: 450 W

Performance data

• • Speed: 0.28 m/s
  • Force: 900 N
  • Work cycle: 50 cycles/hour

Dimensional and general data

• Protection level: IP44
• Working temperature: -20°C +50°C
• Dimensions: 330x210x303 mm
• Weight: 13 kg